Water Filter Claris Smart+

Contents

1 Jura Claris SMART+ water filter 
Filters the water for 2 months.

This water filter also goes under the name Jura Filter cartridge CLEARYL Smart.

Description

The Jura Claris Smart+ Water Filter renews water filtration. For the first time a coffee machine can continually communicate with the filter. It recognises whether a water filter has been inserted and automatically activates the appropriate mode. It continually collects information about filter use and alerts the user when the filter capacity has been exhausted. This not only makes changing the Jura water filter easier than ever before, but also allows the Jura Claris Smart to achieve optimum effectiveness.

This water filter was designed for the following Jura coffee machine models with the intelligent water system (IWS):
Jura Impressa: C3, C8, D4, D6, D60, E4, E6, E60, E600, E8, E80, E800, J6, J8, J10, S8, S80, Z6, Z8, Z10. And the models: ENA 4, ENA 8, Giga 6, Giga 10 and ONO.

This water filter is pH-neutral to coffee and is placed directly in the water reservoir. This will give you three important benefits: The guarantee that the coffee is made with freshly filtered water just before brewing. Fresh water and pure flavours will ensure the ultimate coffee experience. Protection for your machine.

Jura’s Claris Smart filter is tough on lime scale but kind to your machine.

Instructions

Using a Jura Claris Smart filter cartridges is simple. You will find a description in chapter 2 of your manual >> preparation and introduction – Filter placement and activation <<.

Comments

After 50 litres has flowed through the filter or after two months, the filter will stop functioning properly and the cartridge will need to be replaced.

The Claris Smart water filters fits all Jura coffee machines which make use the Jura Claris Blue filters.